PK1D

2 Component Dispenser

Fixed Ratio

Recently launched PK1D. Compact footprint with the same accuracy, repeatability and Fluidic technology.

Recommended for fixed ratio 2 component (2K - 2 part) meter, mix and dispense applications, including hard to handle abrasive, heavy filled, thixotropic and/or odd ratio materials.

Features and Benefits

Linear Displacement Pump (LDP) - Double acting positive displacement rod pumps (Patented)
Continuous metered flow (virtually pulse-free) = Shorter Cycle Time
Dynamic flow rate control 1cc/min. to >gal/min. = Precision Flow Control
Viscosity range 1cps to heavy non-flow abrasive compounds = Universal Pump Utility
Pressure range 1psi to >3,000psi = Universal Pump Utility
No Pistons, Check Valves, Flow Meters = No Slip Factor, No Calibration, Reliability
Low shear = Density Integrity of Syntactic Compounds
Cross-Over Valve (XV4) – Automated 4-way directional flow control valve (Patented)
- Replaces check valves for load/dispense functions during LPD reciprocations = Reliability
- Allows pressure balancing inlet/outlet pressures = Continuous Pulse-Free Metered Flow
PLC Servo Motor Pump Drives Control Benefits:
- Enables Precision Mix Ratio, Flow Control and Factory Automated Control Functions
Touch Screen Benefits:
- No Mechanical Control Adjustments, Control

Standard Features

Linear Displacement Pumps (LDP)- Cross-Over Valves (XV4)
PLC Controlled Servo Drive
Touch Screen Control Interface (6” Mono Chrome)
Dispense Valve Gun
Floor Stand
Dispense Modes: Manual / Programmable

PK1D HMI

Optional Features

Material Supply Sensors (MSS) – Inlet Material Sensors
Liquid Level Sensors - Pressure Pots, Pails, Drums, Totes
Auto Pressure Balancing – Inlet Supply / Outlet Dispense Pressures
Static Mounted Dispense Valve - Foot Switch or Robotic Activation
Robotic Integration – Start/Stop, Flow Control, Purge/Flush Control
Type X Air Purge – Class I, Div1, Group D
Material Supply – Pressure Pots / Transfer Pumps
Signal Tower – LED Light/Audible Alarm
Cabinet Surface Mount Brackets
Overhead Jib Crane
TFE SS Braided Hose Assemblies
Thermostatic Controlled Heating Solutions

Technical Specifications

Mix ratio range A:B - Fixed ratio............................................1:1 2:1 4:1 10:1*
Mix ratio tolerance range ..................................................................... ±1%*
Minimum shot size.................................................................0.5 g/0.018 oz)*
Minimum flow rate ....................................................5 cc/min (0.17 fl.oz/min)*
Maximum flow rate .............................................5,000 cc/min (1.35 gal/min*)
Maximum fluid working pressure .................................................. >3,000 psi*
Air supply pressure range.........................5-8.5 kg/cm2(80-120 psi) @ 20 CFM
Operating temperature range ....................................... 4 to 60 C (40 to 140 F)
Electrical requirements: ....................................120 VAC (60 Hz) 1Φ, 10 amps
.........................................................................220 VAC (60 Hz) 1Φ, 5 amps
Wetted material..................................................303, 316 SS, TFE UHMWPE
Viscosity range of fluids ................................1 cps to Non-flow abrasive comp.
Fluid Handled ...........................................................One or two components
........................................(epoxies, urethanes, silicones, acrylics, polyesters)
*Application dependent

PK1D dimensions

PK1D Literature