PK3D

3 Component Dispenser

Variable Ratio

Recommended for manual and robotic applications. 

Ideal for most 3 component (3K, 3 part) meter, mix and dispense applications, including hard to handle abrasive, heavy filled, thixotropic and/or odd ratio materials.

Features and Benefits

• Linear Displacement Pump (LDP) - Double acting positive displacement rod pumps (Patented)
  • Continuous metered flow (virtually pulse-free) = Shorter Cycle Time
  • Three Component Variable Mix Ratio – 1:1:1 to 100:100:1 (+/-1%) = Long Term Utility
  • Dynamic flow rate control 1cc/min. to >gal/min. = Precision Flow Control
  • Viscosity range 1cps to heavy non-flow abrasive compounds = Universal Pump Utility
  • Pressure range 1psi to >3,000psi = Universal Pump Utility
  • No Pistons, Check Valves, Flow Meters = No Slip Factor, No Calibration, Reliability
  • Low shear = Density Integrity of Syntactic Compounds
• Cross-Over Valve (XV4) – Automated 4-way directional flow control valve (Patented)
  • Replaces check valves for load/dispense functions during LPD reciprocations = Reliability
  • Allows pressure balancing inlet/outlet pressures = Continuous Pulse-Free Metered Flow
• PLC Servo Motor Pump Drives Control
  • Enables Precision Mix Ratio, Flow Control and Factory Automated Control Functions
• HMI Touch Screen
  • No Mechanical Control Adjustments, Statistical Process Reporting (SPR), Control Integrations, Diagnostic Troubleshooting, PM
  • Monitoring, Remote Control Access 

Technical Specifications

Mix ratio range A:B ...................................................................1:1 to 100:1*
Mix ratio tolerance range ...................................................................... ±1%*
Minimum shot size.................................................................0.5 g/0.018 oz)*
Minimum flow rate ....................................................5 cc/min (0.17 fl.oz/min)*
Maximum flow rate ...............................................10,000 cc/min (2.7 gal/min)*
Maximum fluid working pressure ................................................... >3,000 psi*
Air supply pressure range.........................5-8.5 kg/cm2(80-120 psi) @ 20 CFM
Operating temperature range ....................................... 4 to 60 C (40 to 140 F)
Electrical requirements: ....................................120 VAC (60 Hz) 1Φ, 20 amps
.......................................................................220 VAC (60 Hz) 1Φ, 10 amps
Wetted materials .............................................303, 316 SS, TFE UHMWPE
Viscosity range of fluids .................................1 cps to Non-flow abrasive comp.
Fluid Handled ............................................................One or two components
.........................................(epoxies, urethanes, silicones, acrylics, polyesters)
*Application dependent

PK3D Brochure