Fluidic Systems — home
(714) 556-6747Request a Quote
HOME/APPLICATIONS/Filter & Membrane Potting
FILTRATION

Filter & Membrane Potting.

Potting filter elements, membrane assemblies and filter end caps with two-component adhesives or encapsulants.

MATERIALSCytec 27056 / GS Polymers polyurethane · A-12 Epoxy Resin Adhesive · Epocast 44526 / 54526
ALSO RUNSPlus other polyurethane and epoxy systems.
Request a quote
Robot dispensing a continuous bead onto a flat assembly inside an automation cell

Requirements.

  • Continuous dispensing around filter molds or assemblies.
  • Consistent bead or fill rate.
  • Accurate ratio.
  • Repeatable fill volume.
  • Relatively high production throughput.
  • Handle dissimilar component viscosities.
  • Reliable operation over extended production cycles.

Fluidic solution.

  • PK1D for appropriate fixed-ratio applications.
  • PK2D for variable-ratio applications.
  • Continuous servo-driven dispensing.
  • Positive-displacement metering for consistent ratio and output.
  • Automated integration where required.
PK2D with two drum supply pumps configured for continuous production
PK3D with three ram pumps on the production floor
RECOMMENDED SYSTEMBuilt on PK1D · PK2D.
PK1D PK2D

More applications.

All applications
Gloved operator drawing a smooth bead of syntactic along the routed edge of an aluminium honeycomb panel
AEROSPACE INTERIORHoneycomb Edge Fill / Void Filling
Applicator laying shim material along the edge of a vertical composite structure
AEROSPACE STRUCTURESLiquid Shim / Moldable Plastic Shim
Robot dispensing a two-component adhesive bead onto a panel inside a guarded cell
AEROSPACE / AUTOMOTIVE / DEFENSE / GENERAL INDUSTRIALStructural Bonding / Sealing / Gasketing

Have a similar application?

Send your material, ratio and flow rate — an engineer will confirm the right system.

Request a quote (714) 556-6747